OpenLDAP-2.6.3

Introduction to OpenLDAP

The OpenLDAP package provides an open source implementation of the Lightweight Directory Access Protocol.

This package is known to build and work properly using an LFS-11.2 platform.

Package Information

Additional Downloads

OpenLDAP Dependencies

Recommended

Optional

GnuTLS-3.7.7, Pth-2.0.7, unixODBC-2.3.11, MariaDB-10.6.9 or PostgreSQL-14.5 or MySQL, OpenSLP, WiredTiger, and Berkeley DB-5.3.28 (for slapd, but deprecated)

User Notes: https://wiki.linuxfromscratch.org/blfs/wiki/openldap

Installation of OpenLDAP

[Note]

Note

If you only need to install the client side ldap* binaries, corresponding man pages, libraries and header files (referred to as a client-only install), issue these commands instead of the following ones (no test suite available):

patch -Np1 -i ../openldap-2.6.3-consolidated-1.patch &&
autoconf &&

./configure --prefix=/usr     \
            --sysconfdir=/etc \
            --disable-static  \
            --enable-dynamic  \
            --enable-versioning=yes  \
            --disable-debug   \
            --disable-slapd &&

make depend &&
make

Then, as the root user:

make install

There should be a dedicated user and group to take control of the slapd daemon after it is started. Issue the following commands as the root user:

groupadd -g 83 ldap &&
useradd  -c "OpenLDAP Daemon Owner" \
         -d /var/lib/openldap -u 83 \
         -g ldap -s /bin/false ldap

Install OpenLDAP by running the following commands:

patch -Np1 -i ../openldap-2.6.3-consolidated-1.patch &&
autoconf &&

./configure --prefix=/usr         \
            --sysconfdir=/etc     \
            --localstatedir=/var  \
            --libexecdir=/usr/lib \
            --disable-static      \
            --enable-versioning=yes \
            --disable-debug       \
            --with-tls=openssl    \
            --with-cyrus-sasl     \
            --enable-dynamic      \
            --enable-crypt        \
            --enable-spasswd      \
            --enable-slapd        \
            --enable-modules      \
            --enable-rlookups     \
            --enable-backends=mod \
            --disable-sql         \
            --disable-wt          \
            --enable-overlays=mod &&

make depend &&
make

The tests appear to be fragile. Errors may cause the tests to abort prior to finishing, apparently due to timing issues. The tests take about 65 minutes and are processor independent. To test the results, issue: make test.

Now, as the root user:

make install &&

sed -e "s/\.la/.so/" -i /etc/openldap/slapd.{conf,ldif}{,.default} &&

install -v -dm700 -o ldap -g ldap /var/lib/openldap     &&

install -v -dm700 -o ldap -g ldap /etc/openldap/slapd.d &&
chmod   -v    640     /etc/openldap/slapd.{conf,ldif}   &&
chown   -v  root:ldap /etc/openldap/slapd.{conf,ldif}   &&

install -v -dm755 /usr/share/doc/openldap-2.6.3 &&
cp      -vfr      doc/{drafts,rfc,guide} \
                  /usr/share/doc/openldap-2.6.3

Command Explanations

--disable-static: This switch prevents installation of static versions of the libraries.

--disable-debug: This switch disables the debugging code in OpenLDAP.

--enable-dynamic: This switch forces the OpenLDAP libraries to be dynamically linked to the executable programs.

--enable-versioning: This switch enables symbol versioning in the OpenLDAP libraries. Without this, some applications might generate a warning about missing symbol versions.

--enable-crypt: This switch enables using crypt(3) passwords.

--enable-spasswd: This switch enables SASL password verification.

--enable-modules: This switch enables dynamic module support.

--enable-rlookups: This switch enables reverse lookups of client hostnames.

--enable-backends: This switch enables all available backends.

--enable-overlays: This switch enables all available overlays.

--disable-sql: This switch explicitly disables the SQL backend. Omit this switch if a SQL server is installed and you are going to use a SQL backend.

--disable-wt: This switch explicitly disables the WiredTiger backend. Omit this switch if WiredTiger is installed and you are going to use a WiredTiger backend.

--libexecdir=/usr/lib: This switch controls where the /usr/lib/openldap directory is installed. Everything in that directory is a library, so it belongs under /usr/lib instead of /usr/libexec.

--enable-slp: This switch enables SLPv2 support. Use it if you have installed OpenSLP.

[Note]

Note

You can run ./configure --help to see if there are other switch you can pass to the configure command to enable other options or dependency packages.

install ..., chown ..., and chmod ...: Having slapd configuration files and ldap databases in /var/lib/openldap readable by anyone is a SECURITY ISSUE, especially since a file stores the admin password in PLAIN TEXT. That's why mode 640 and root:ldap ownership were used. The owner is root, so only root can modify the file, and group is ldap, so that the group which owns slapd daemon could read but not modify the file in case of a security breach.

Configuring OpenLDAP

Config Files

  • For LDAP client: /etc/openldap/ldap.conf and ~/.ldaprc

  • For LDAP server, two configuration mechanisms are used: a legacy /etc/openldap/slapd.conf configuration file and the recommended slapd-config system, using an LDIF database stored in /etc/openldap/slapd.d.

Configuration Information

Configuring the slapd servers can be complex. Securing the LDAP directory, especially if you are storing non-public data such as password databases, can also be a challenging task. In order to set up OpenLDAP, you'll need to modify either the /etc/openldap/slapd.conf file (old method), or the /etc/openldap/slapd.ldif file and then use ldapadd to create the LDAP configuration database in /etc/openldap/slapd.d (recommended by the OpenLDAP documentation).

[Warning]

Warning

The instructions above install an empty LDAP structure and a default /etc/openldap/slapd.conf file, which are suitable for testing the build and other packages using LDAP. Do not use them on a production server.

Resources to assist you with topics such as choosing a directory configuration, backend and database definitions, access control settings, running as a user other than root and setting a chroot environment include:

Boot Script

To automate the startup of the LDAP server at system bootup, install the /etc/rc.d/init.d/slapd init script included in the blfs-bootscripts-20220722 package using the following command:

make install-slapd
[Note]

Note

You'll need to modify /etc/sysconfig/slapd to include the parameters needed for your specific configuration. See the slapd man page for parameter information.

Testing the Configuration

Start the LDAP server using the init script:

/etc/rc.d/init.d/slapd start

Verify access to the LDAP server with the following command:

ldapsearch -x -b '' -s base '(objectclass=*)' namingContexts

The expected result is:

# extended LDIF
#
# LDAPv3
# base <> with scope baseObject
# filter: (objectclass=*)
# requesting: namingContexts
#

#
dn:
namingContexts: dc=my-domain,dc=com

# search result
search: 2
result: 0 Success

# numResponses: 2
# numEntries: 1

Contents

Installed Programs: ldapadd, ldapcompare, ldapdelete, ldapexop, ldapmodify, ldapmodrdn, ldappasswd, ldapsearch, ldapurl, ldapvc, ldapwhoami, slapacl, slapadd, slapauth, slapcat, slapd, slapdn, slapindex, slapmodify, slappasswd, slapschema, and slaptest
Installed Libraries: liblber.so, libldap.so, and several under /usr/lib/openldap
Installed Directories: /etc/openldap, /{usr,var}/lib/openldap, and /usr/share/doc/openldap-2.6.3

Short Descriptions

ldapadd

opens a connection to an LDAP server, binds and adds entries

ldapcompare

opens a connection to an LDAP server, binds and performs a compare using specified parameters

ldapdelete

opens a connection to an LDAP server, binds and deletes one or more entries

ldapexop

issues the LDAP extended operation specified by oid or one of the special keywords whoami, cancel, or refresh

ldapmodify

opens a connection to an LDAP server, binds and modifies entries

ldapmodrdn

opens a connection to an LDAP server, binds and modifies the RDN of entries

ldappasswd

is a tool used to set the password of an LDAP user

ldapsearch

opens a connection to an LDAP server, binds and performs a search using specified parameters

ldapurl

is a command that allows to either compose or decompose LDAP URIs

ldapvc

verifies LDAP credentials

ldapwhoami

opens a connection to an LDAP server, binds and displays whoami information

slapacl

is used to check the behavior of slapd by verifying access to directory data according to the access control list directives defined in its configuration

slapadd

is used to add entries specified in LDAP Directory Interchange Format (LDIF) to an LDAP database

slapauth

is used to check the behavior of the slapd in mapping identities for authentication and authorization purposes, as specified in slapd.conf

slapcat

is used to generate an LDAP LDIF output based upon the contents of a slapd database

slapd

is the standalone LDAP server

slapdn

checks a list of string-represented DNs based on schema syntax

slapindex

is used to regenerate slapd indexes based upon the current contents of a database

slapmodify

modifies entries in a slapd database

slappasswd

is an OpenLDAP password utility

slapschema

is used to check schema compliance of the contents of a slapd database

slaptest

checks the sanity of the slapd.conf file

liblber.so

is a set of Lightweight Basic Encoding Rules routines. These routines are used by the LDAP library routines to encode and decode LDAP protocol elements using the (slightly simplified) Basic Encoding Rules defined by LDAP. They are not normally used directly by an LDAP application program except in the handling of controls and extended operations

libldap.so

supports the LDAP programs and provide functionality for other programs interacting with LDAP